Quantcast
Channel: Nintex Connect: Active Threads
Viewing all 4245 articles
Browse latest View live

トーマスビヨン、当日トムルイスシェア首位の座

$
0
0

         オープン選手権が始まったとき、雲が木曜日の朝に塗抹灰色だった。されていない場合は怒って白波のために、それは空が終了し、北海が始まったところ言うことは困難であっただろう。言い換えれば、典型的なオープン天気 - それはロイヤルセントジョージズで雨のヒントを使用してさわやかだった。

 

それだけでなく、代表的なオープンスタートだった:何が期待どおりに、あなたが知っていたと思ったすべてがその頭の上に投げられた行きませんでした。驚きに満ちた一日の終わりには、2つだけ確かなものがあった -ロリーマッキロイは、彼は議会でのUSオープンでromped方法のようにオープンワイヤ対ワイヤを獲得するつもりはないが、天気予報ではありませんナプキン価値はそれらがに書かれている。

 

マッキロイは、ゲームの新しい現スーパースターは、彼の最初の3つの穴をbogeyed-おっと!これだけで、明らかにロリーは完璧ではあり​​ません。悪くない - それでも、マッキロイは1オーバーパー71by テーラーメイド rocketbladezアイアンを撮影するために戻って戦った。

 

ルークドナルド、1号世界のプレーヤーとのために彼の卓越したショートゲームのプレトーナメントのお気に入りの一つは、クレジットカードでのrocketbladezアイアンを買うことができなかった木曜日、また71を投稿しました。

 

 "私は、rocketbladez販売が起こっていたたければそれは非常に良いラウンドだったかもしれない、"困惑したドナルドは言った。

 

予報では30以上のmphでハウリングに強い風と暖かい、乾燥した日を求めた。その代わりに、浮遊通り雨1520 mphの着実な風が続く短い朝スプリッツは、十分なフラグが羽ばたきが、それはあるかもしれないように聞こえる解体ダービーにこのオープンを回すのに十分ではない維持するために、そこにあった。

 

"特定の穴はこの風向で、非常に、非常に厳しいです"と、午前中に69を撃ったイアン·ポールターは、言った。それは南、南東または南西の場合は"あなたは非常に悪く感じることはありません。あなたは、かなりの数のチャンスを持っていますそれはこの方向だとき、風下穴は簡単ではありません。あなたがピン近くのどこかにそれを止めることはできません。あなたはあなたがのように風下に撃たくさびを停止することができないのではなく、5番アイアンを停止するチャンスを持っているので、風に入るときに、実際にホッと。"

 

午後は身に着けていたとして、風が実際に低いスコアの大部分が掲載された時であった、オフ著しく緩和された。

 

これは、2つの選手がそうではなかったようにそれが見えたにもかかわらず、ロイヤルセントジョージズではまだたくさんのタフな一日だった。彼はサイドバンカーの3ショットを取り出したとき、彼は2003年オープンを失った16番ホールで短いバーディーパットを行った後にアンダー6に達したときにデンマークのトーマスビヨンは、一日の公式最初のショックだった。最終ホールでマイナーへまは見事な6540歳のビョルン、8歳の彼の印象的な損失の後に本当であるには余りにもよかった話を残した。

 

Bjornのゲームは後半の修羅場だったと彼はビジェイ·シンは怪我のために撤退した後にオープンのみ月曜日に入ると、フィールドへの代替であった、特に以来。ビョルン彼はロフト9番アイアンのショットに近い第十六でそのパットによっておおわバック9上の行で3バーディーの連勝を、持っていた。

 

"私は第11回ティーにアーニー·エルスに話していた、我々はのようだった、どのようにそこにアンダートーマス6ですか?"マッキは後で言った。"これは、3つのクラブの風だった。私はrocketbladezにより、8アイアン125ヤードを打った。"

 

それは、彼はいくつかの時間のコースで不快だっとピート·コーワン、彼のスイングコーチと範囲で作業今週の時間を費やしていると認めビヨン、ため驚異的な一日でした。 Bjornは彼の65の後にコーワンと範囲に出て帰りました。さらに印象的なのはビョルン日の過酷な条件で(後にアマチュアのトム·ルイスによって結ばれる)その日のベストスコアを撃ったということでした。

 

"私は日曜日までずっと続くことができる場合にのみ時間が教えてくれる、"ビョルンは言った。"しかし、私は、今日と非常に、非常に喜んでいる。"

 


ガルシアは彼のゲームについては良い感じ

$
0
0

セルジオ·ガルシアは、ロイヤルセントジョージスの大ファンであることではないにも関わらず、今週オープンの肯定先読みを滞在している。

 

ここ数年は、スペイン人のための闘争であっオープンで彼のパフォーマンスに代表されています。共同14位には、先行する年の第51回と第三十八バークデールとターンベリーでの上映後に、彼のために比較的良いフィニッシュ周りの最後の時間だった。

 

しかし、ガルシアはまだ彼はカーヌスティでパドレイグ·ハリントンにプレーオフで失われ、2007年に彼のパフォーマンスの思い出を持って、そして2011年には1より良い行くことを期待されます。

 

彼は、ロイヤルセントジョージスコースは正確に自信をもって彼を鼓舞していないことを、彼はここにタイトリスト 913を再生することがあまりにも多くの幸せな思い出を持っていないこと、しかし、認めている。

 

"それは私の好みではありませんだ、私はあなたにうそをつくつもりはありません、" 31歳は言った。"間違いなくこれよりも良いコースがあります。

 

"それはすぐに風のビットがあるとして、それが他のコースに関してより913 d2 ドライバーに複雑になりますが、一般的な用語で、それは良いことだし、それは非常に良い状態でのことはもちろんだ。"

 

フォームの長い失望実行後、ガルシアのゲームが軌道に乗るために始めている。彼はほぼ以前の彼のキャリアの中で第三ほど高くなった後、最近のトップ100から脱落したが、彼ははるかに良いコース上との問題に対処する方法を学ぶために始めていることを示す兆候を見せている。

 

彼は米国のオープン先月で7位でフィニッシュし、ミュンヘンのBMWインターナショナル·オープンでプレーオフの敗北でそれをフォローアップ - 200911月のHSBCチャンピオンズイベントでの勝利以来、彼の最高の仕上がり。

 

"それは私にとって良い月でした。私は肯定的な感情を持っていた、"と彼は言った。

 

"オープンに到達する全米オープンのために修飾し、そこによくプレーし、ドイツでもよく913 d3 ドライバーを果たしているようにすることができたことは私にとって重要だった。

 

"しかし、私は同じパスに続けなければなりません。私は正しい方向に進んでいると私は、私は良い事をし続けることを願って。

 

私は年間を通して行っているように、"ドイツの後、私は913 d3と同じように実践している。

 

"私はまた、いくつかの時間を脱いで、私の兄といくつかの友達と一緒にイビサに行ってきました、我々は素晴らしい時間を過ごしました。残りの時間を、私は練習や準備をしてきた。

 

"オープンで優れている点は、あなたが得ようとしている天候のどのタイプか分からないです。

 

 

How to get approver name from Requst approval if its assigned to a group.

$
0
0

Hi Team,

I have one request approval in which there is 3 groups assigned. I have given all must approve. The requirment is that I want to know the approver details, even at the first approval. We will get the approver comments after all the approval, but I need the approver details in between approvals. In the WorkFlow task list, the name of approver is not capturing anywhrere.

Please suggest a way.

Thanks,

SG.

Error activating Nintex features via handler or stapler feature

$
0
0

I have a SharePoint powershell script that creates a site collection and activates a handler or stapler feature, which activates the required site and web scope features in order using their respective GUIDs. I tried activating the following features in order

   NintexWorkflow (site)
   NintexWorkflowWeb (web)

but I couldn't get the features to activate until I explicitly activated the feature that the site scope feature was dependent upon first

   NintexWorkflowContentTypeUpgrade (site)

What features do I need to activate in this method (via a handler feature) for Nintex to work? Are there additional dependencies I need to activate first?

Also we have Nintex installed on a thee-tier SharePoint farm and NintexWorkflowContentTypeUpgrade appears to be installed on the APP server but not the WEB server.

Does this matter?

Thanks,
Chris

AIHW application developer 

Nintex Workflows 2010
SharePoint 2010 SP1

Is a Public Facing SharePoint server a requirement for Nintex Live to work?

$
0
0

The SharePoint server does not need to be public facing but must have internet access. The Nintex Live installation on SharePoint needs to connect to the Azure server (to access the catalog, and connect to web services), and also verify licences.

Nintex Update Field & attachments

$
0
0

Hello all,

 I'm working on a project which need a naming convention for attachments, in a document library.

I have no "standard" solution for that with Sharepoint, but I hope I can do this with Nintex.

Do you know how I can update the attachment name with nintex?

Thanks,

David

Getlist Items Returning Balnk values

$
0
0

I am unsing call webservice with get list items with following input

URL : Web Url/_vti_bin/lists.asmx

Editor Mode - SOAP Editor

WebMethod - GetListItems

SOAP Editor 

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Body>
        <GetListItems xmlns="http://schemas.microsoft.com/sharepoint/soap/">
            <listName>{8d42b4cb-c500-4e1b-a1b4-025c8615d2e7}</listName>
            <viewName></viewName>
           <Query>

     <Where><Eq><FieldRef Name="Opening_x0020_Status" />

<Value Type="Text">Active</Value></Eq></Where></Query>

<ViewFields>

<FieldRef Name="Task_x0020_Order" />

<FieldRef Name="Task_x0023_" />

<FieldRef Name="Hiring_x0020_Manager" />

<FieldRef Name="Manager_x0020_Phone" />

</ViewFields>

         <rowLimit></rowLimit>
            <queryOptions></queryOptions>
            <webID></webID>
        </GetListItems>
    </soap:Body>
</soap:Envelope>

Store the output in the string variable.

The string variable is always blank - Any Idea whats wrong with the SOAP

This is retuning

Download of Version 2.3

$
0
0

Hello Nintex,

 

thanks for your great product and instant support. I recieved yesterday an email that announced the Nintex Workflow 2010 Version 2.3 but i cannot find it anywhere.

 Our Softwareassurance is still activ (til march 2012). What's my error, or has it not been released yet?

 Thanks to any reply, Arnold


Field type is not recognized

$
0
0

Hi,

in a blank workflow I add a wait 'wait for item update' action and configure it to wait until a text field gets updated to some specific value. After saving there is a warning icon on the action and it states 'The following fields must be configured: Field type is not recognized.'

I can use any field or type (title, text, choice, etc.) or condition (equals, is empty, etc.) and always get the same error. 

All other workflow actions seem to work fine. I tried this on two seperate new SharePoint 2013 Enterprise servers with Nintex WF 2013. (First server was german plus english language pack and second OS and SPS were in english)

Kind regards

Alex 

NEW USER - HELP WITH APPROVAL WORKFLOW

$
0
0

Hello

 I am totally new to Nintex and have been tasked with creating a document approval workflow.

We use Sharepoint and will be uploading a simple word document Newsletter that will require approval from a handful of executives. I have no idea how to do this. I have created very simple workflows that removes a document when the status has been marked complete, but that's about it.

I don't know how to set up an approval so that the executives are notified when a new newsletter document has been uploaded and requires their approval. They will need to approve it or reject it and we would like them to enter comments if they are rejecting the document.

Any advice on how to do this would be greatly appreciated.

 Thanks in advance!

Courtney

Failed to invoke Microsoft Exchange Service

$
0
0

We are working to set up a workflow that will create a task for users using Exchanage impersonation.  I have set up the Exchange impersonation per

http://msdn.microsoft.com/en-us/library/exchange/bb204088(v=exchg.140).aspx

We entered the credentials of the impersonation account as a workflow constant and assigned them to the workflow we have for creating the task.  I have imported/verified the root certificates are in the certificate manager on the SharePoint server, and we've added the certificates in the Central Management console for SharePoint.  If I log on directly to the SharePoint server I can connect to the URL mention in the Microsoft MSDN article above without getting a certificate prompt error, and we are using that URL in our workflow setup.  Still the workflow fails with the error "Failed to invoke Microsoft Exchange web service.  Error returned from server: The underlying connection was closed: could not establish trust relationship for the SSL/TLS secure channel".

Is there a document somewhere that goes over all the specific configuration steps that need to be considered for integration with Exchange 2010?

HELP with Simple Document Approval Workflow

$
0
0

Hello!

 I am a totally new and green Nintex user. I have no idea what I'm doing... I have been tasked with creating an approval workflow for a monthly newsletter that will be posted to our company's sharepoint site.

When the newsletter is uploaded, an email needs to be sent to a handfull of executives for their approval or rejection (with comments). How do I do this? The newsletter will be a word document or a *.pdf file. The executive will receive an email stating that they have a new document to approve. They need to be able to go in, view the document, approve it, or reject it (with comments).

I can't imagine this being as difficult as I'm making it.

Can anyone help? Thank you :)

Object reference not set to an instance of ... issue

$
0
0

I am not the admin of this system and have little control or troubleshooting reousrces.  I am getting "server was unable to process request. ---> Object reference not set to instance of an object.  This occurs while renaming workflow variables.  I originally thought it may be due to the length of the variable name exceeding some limit.  Another thought was that I am renaming a variable that I am no longer using in this workflow.  The workflow collects related information from SharePoint lists and generates notification emails.  It is not making any external (SQL, SOAP, etc.) call to accomplish this.

Any insight on this would be appreciated.

Failed to start workflow. Object reference not set to an instance of an object.

$
0
0

Hi all

I had a two workflows in development environ ment. Where one workflow starts the second one on certain condition. IT was working there.

I moved the workflows to production server. The second wokrflow is giving error when started by the first workflow. "Failed to start workflow. Object reference not set to an instance of an object."

 Here is what I Could find in sharepoint logs.

0x0A74 Windows Sharepoint Services Workflow Infrastructure 72fv unexpected AutoStart Workflow: System.ArgumentException: New instance of this workkflow template are currently disallowed. at Microsoft.Sharepoint.WOrkflow.SPWorkflowManager.StartWorkflowElev(SPListItem item,SPFlie file, SPWorkflowAssociation association, SPWorkflowEvent startEvent , Boolean bAutoStart , Boolean bCreateOnly) at Microsoft.SHarepoint.WOrkflow.SPWorkflowAutostartEventReceiver.AutoStartWorkflow(SPItemEvenetProperties properties,Boolean bCreate, Boolean bChange , AssocType atyp)

Can any help regarding this?

Thanks!

Kammela

 

 

Update Values for Project Custom Fields

$
0
0

I would think this would be rather trivial, but then again, nothing is with Project.

Scenario: I want to set several custom field values that are Cost or Text to defaults either upon project creation or something similar. Heck, you could even just say I want to set a value on a project during an event.

Problem: You run in to issues where the projects are checked out or can't update with certain events like Create, etc.

Question: What event is the best place to do this?

Thanks,

Kirk


Escalation at 4320 minutes yields escalation at 5 days

$
0
0

I have a FlexiTask for which I've specified an escalation:

  •  Escalation type: complete task
  • Time to escalation
    • Days: 0
    • Hours: 0
    • Mins: constChangeTeamEscalationInMinutes
  • Time calculation:
    • Checked -- During business days only
    • Unchecked -- During business hours only
  • Outcome: No response

constChangeTeamEscalationDurationInMinutes is a workflow variable with a default value of 4320. This value does not get changed in the workflow.

When this workflow executes, the escalation occurs 5 business days later. My math says that 4320 minutes = 3 days. For instance, the workflow starts at 1/8/2013 2:10 pm, and the escalation occurs at 1/15/2013 2:22 pm.

Thoughts?

"Start on Item Creation" not working?

$
0
0

Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4Using: Forms 1.2.0.0 and Workflow 2.3.7.0

 

Really basic newbie question here. I have just created my first trivial Nintex Workflow, a 1-step notification when a list item is submitted.

The workflow is configured to "Start when item is created" but it's not happening. No email is sent.

If I start the workflow manually on an existing list item it works correctly.

The Nintex Workflow history page for the (sub)site containing the list contains no entries, nothing running, completed OR cancelled/errored, which is a bit odd because I have run the workflow 2 or 3 times manually to completion.

I checked the site collection level NW log too, just in case the log data had ended up there, but nothing.

Where should I be looking for information on why the workflow is not being triggered automatically when a list item is created?

Any ideas greatly appreciated.

Regards: colin_e

The task is blocked by a running workflow and can not be edited.

$
0
0

Hi,

  The error "The taskis blocked by arunningworkflowand can not beedited." its been displayed for me everytime that i try to execute a task on my workflow... im looking for a solution on internet for 2 days and a i cannot find a fix to this problem...

Can anyone help me?

 Tnx!

Jonatan Kapps, Brazil
jonatan.kapps@inpartec.com.br

How to upgrade to latest version of Nintex Workflow 2010?

$
0
0
How do I upgrade Nintex Workflow 2010 to the latest patch?  We're running v2.1.1.0 and would like to upgrade to v2.3.7.0.  Do I need to completely uninstall the previous version?  Should I shutdown IIS or some SharePoint services first?

Lazy approval not working with LYNC

$
0
0

Hi,

We have enabled IM notification and also have enabled lazy approval for IM. But it is not working. The user is able to respond to the initial message but at the end it is giving the below error message

 An error was encountered: You are not permitted to respond to this task. Tasks can be delegated via the approve/reject web interface.

 We have verified the user's permission toboth to the item and the task list and it is correct. On going through your forum we see lot's of similar error like this one. We have checked the diag logs but wasn't able to find something which will relate directly to the above error message.

Any help will be appreciated.

Viewing all 4245 articles
Browse latest View live